C
HAPTER
3
| System Configuration
Setup Wizard
– 35 –
◆
Protocol
— The protocol used will be specified by your service
provider. Choose from the following options:
■
PPPoE
— Point-to-Point Protocol over Ethernet (PPPoE).
■
PPPoA
— Point-to-Point Protocol over Asynchronous Transfer Mode
(PPPoA).
■
1483 MER : DHCP
— 1483 MER is an RFC standard MAC
Encapsulated Routing protocol.
■
1483 MER : Static IP
— 1483 MER is an RFC standard MAC
Encapsulated Routing protocol.
■
1483 Bridged
— The Bridged RFC 1483 Encapsulated Traffic over
ATM feature allows you to send bridged RFC 1483 encapsulated
packets over ATM switched virtual circuits (SVCs).
■
1483 Routed
— Allows you to send routed RFC 1483 encapsulated
packets over ATM switched virtual circuits (SVCs).
■
IPoA
— Dynamic IP over ATM (IPoA).
◆
Connection Type
— Your connection type will also be specified by your
service provider. Choose from the following options:
■
VC-Mux
— Virtual circuit multiplexing (VC-Mux).
■
LLC
— Logical Link Control (LLC).
◆
VPI
— The ATM Virtual Path Identifier. (Range: 0-255)
◆
VCI
— The ATM Virtual Channel Identifier. (Range: 32-65535)
◆
Username
— Enter the username provided by your service provider.
◆
Password
— Enter the password provided by your service provider.
◆
Confirm Password
— Re-enter your password.
