C
HAPTER
6
| WAN Settings
ATM Settings
– 55 –
selected, the WAN interface IP address is assigned by the remote
DHCP server.
■
Local IP address
— The IP address of the WAN interface provided
by the ISP.
■
Gateway
— The IP address of the remote gateway router provided
by the ISP.
■
Netmask
— The subnet mask for the local IP address.
■
Default Route
— Enables or disables the default route IP address.
■
Unnmbered
— Enables the IP unnumbered feature.
ATM S
ETTINGS
The ATM Settings page is used to configure the settings between your
ADSL Router and the remote ATM PVC switch, including connection mode
(single or multiple service over one connection), and packet level QoS.
The ATM Settings parameters form a Traffic Contract that informs the
network what type of traffic is to be transported and the performance
requirements of the traffic.
Figure 24: ATM Settings
The following items are displayed on this page:
◆
Select
— Clicking the radio button associated with the connection
makes the parameters editable.
◆
VPI
(Virtual Path Identifier) — Adds a VPI entry to the table. (Range:
0-255; Default: 0)
