2. Mount the device in the rack, using four rack-mounting
screws and nuts (not provided).
Figure 4-2. Installing the Switch in a Rack
3.
Turn to the section, “Connecting to the Console Port.”
Desktop or Shelf Mounting
1. Attach the four adhesive feet to the bottom of the switch.
Figure 4-3. Attaching the Adhesive Feet
2. Set the switch on a flat surface near an AC power source,
making sure there are at least two inches of space on all
sides for proper air flow.
3.
Turn to the next section, “Connecting to the Console Port.”
4-5
I
NSTALLING
Summary of Contents for SMC6516FF
Page 95: ...and the operating mode half or full duplex 5 37...
Page 96: ...SNMP Protocol 6 2 Using RMON 6 3 MIB Objects 6 3 6 1 CHAPTER 6 MANAGING VIA SNMP AND RMON...
Page 110: ...Introduction C 2 Windows Terminal C 3 APPENDIX C SAMPLE CONFIGURATION C 1...
Page 113: ...Troubleshooting Chart D 2 APPENDIX D TROUBLESHOOTING D 1...