Telnet Menu
The Telnet Menu is accessed from the Utilities Menu by select-
ing “Establish Telnet Session.”
___________________________________________________
>>>> Telnet Menu <<<<
1. Configure Telnet Server IP Address.[ 0. 0. 0. 0]
2. Initiate Telnet Session
<ESC> To Exit Menu
Enter Selection:
___________________________________________________
Figure 5-17. Telnet Menu
Menu Selections
Configure Telnet Server IP Address
—Allows you to enter the
IP address of the remote unit with which you want to communi-
cate. You must use numbers; domain names are not supported.
Initiate Telnet Session
—Allows you to initiate the Telnet ses-
sion once an IP address has been entered.
5-24
C
ONFIGURING AND
M
ONITORING
Summary of Contents for SMC6516FF
Page 95: ...and the operating mode half or full duplex 5 37...
Page 96: ...SNMP Protocol 6 2 Using RMON 6 3 MIB Objects 6 3 6 1 CHAPTER 6 MANAGING VIA SNMP AND RMON...
Page 110: ...Introduction C 2 Windows Terminal C 3 APPENDIX C SAMPLE CONFIGURATION C 1...
Page 113: ...Troubleshooting Chart D 2 APPENDIX D TROUBLESHOOTING D 1...
