SNMP Configuration Menu
The SNMP Configuration Menu is accessed from the Switch
Configuration Menu.
___________________________________________________
>>>> SNMP Configuration Menu <<<<
1. SNMP Get Community Name ( 10 characters max ).. [ public ]
2. SNMP Set Community Name ( 10 characters max ).. [ public ]
3. System Location ( 24 characters max ).. [ ]
4. System Name ( 24 characters max )...... [ ]
5. System Contact ( 24 characters max )... [ ]
<ESC> To Exit Menu
Enter Selection:
___________________________________________________
Figure 5-5. SNMP Configuration Menu
Menu Selections
SNMP Get Community Name
—Allows you to enter the Get
community name (up to 10 alphanumeric characters) for read-
only SNMP access.
SNMP Set Community Name—
Allows you to enter the Set
community name (up to 10 alphanumeric characters) for write
SNMP access.
System Location—
Allows you to enter the physical location
(up to 24 alphanumeric characters) assigned to the switch for
SNMP management purposes.
System Name
—Allows you to enter the administrative name
(up to 24 alphanumeric characters) assigned to the switch for
SNMP management purposes.
System Contact
—Allows you to enter the name of a person to
contact (up to 24 alphanumeric characters) regarding the opera-
tion of the switch, as used for SNMP management.
5-11
C
ONFIGURING AND
M
ONITORING
Summary of Contents for SMC6516FF
Page 95: ...and the operating mode half or full duplex 5 37...
Page 96: ...SNMP Protocol 6 2 Using RMON 6 3 MIB Objects 6 3 6 1 CHAPTER 6 MANAGING VIA SNMP AND RMON...
Page 110: ...Introduction C 2 Windows Terminal C 3 APPENDIX C SAMPLE CONFIGURATION C 1...
Page 113: ...Troubleshooting Chart D 2 APPENDIX D TROUBLESHOOTING D 1...