5-16
C
ONFIGURING AND
M
ONITORING
Port Summary Display Screen
The Port Summary Display Screen is accessed from the Port
Configuration Menu by selecting “Port Summary.” All the fields
on this screen are read-only.
___________________________________________________
>>>> Port Summary Display <<<<
Port Port Type MAC Address Port State Priority Address Cnt
1 [ 10BaseT] [00800F800014] [Forwarding] [ 128] [ 0]
2 [ 10BaseT] [00800F800015] [Forwarding] [ 128] [ 0]
3 [ 10BaseT] [00800F800016] [Forwarding] [ 128] [ 0]
4 [ 10BaseT] [00800F800017] [Forwarding] [ 128] [ 0]
5 [ 10BaseT] [00800F800018] [Forwarding] [ 128] [ 0]
6 [ 10BaseT] [00800F800019] [Forwarding] [ 128] [ 185]
7 [ 10BaseT] [00800F80001A] [Forwarding] [ 128] [ 0]
8 [ 10BaseT] [00800F80001B] [Forwarding] [ 128] [ 0]
9 [ 10BaseT] [00800F80001C] [Forwarding] [ 128] [ 0]
10 [ 10BaseT] [00800F80001D] [Forwarding] [ 128] [ 0]
.
.
17 [100BaseFX] [00800F800024] [Forwarding] [ 128] [ 0]
18 [100BaseTX] [00800F800025] [Forwarding] [ 128] [ 0]
Type Any Key To Continue ...
___________________________________________________
Figure 5-10. Port Summary Display Screen
Display Fields
Port
—Displays the number of the port to which the summary
applies.
Port Type
—Displays the type of port.
MAC Address
—Displays the MAC address assigned to the port.
Port State
—Displays the current state of the port. This deter-
mines the action a port takes when a packet is received.
Priority
—Displays the priority of the port in relation to other
ports.
Address Cnt
—Displays the number of learned addresses
acquired by the port since the last power-off or reset.
Summary of Contents for SMC6516FF
Page 95: ...and the operating mode half or full duplex 5 37...
Page 96: ...SNMP Protocol 6 2 Using RMON 6 3 MIB Objects 6 3 6 1 CHAPTER 6 MANAGING VIA SNMP AND RMON...
Page 110: ...Introduction C 2 Windows Terminal C 3 APPENDIX C SAMPLE CONFIGURATION C 1...
Page 113: ...Troubleshooting Chart D 2 APPENDIX D TROUBLESHOOTING D 1...
