Shared Vertical LED Array and Port Select Button
At power-up, the shared vertical LED array displays the status of
port 1. To display the status of port 2, press the Port Select but-
ton located to the right of the array. Repeated depressions of
this button will cycle through all eighteen ports.
Figure 2-7. Vertical LED Array and Port Select Button
The vertical LED array is described in the following table:
A
BOUT THE
S
WITCHES
2-8
Vertical LED Array
Function
Condition
Description
Receive
Green
Data is being received
Collision
Yellow
Two or more devices on the segment
are transmitting at the same time
Full
Yellow
Port configured for full-duplex
Duplex
operation (available on all ports)
100 Mbs
Yellow
Port is operating at 100 Mbps data rate
Off
Port is operating at 10 Mbps data rate
Summary of Contents for SMC6516FF
Page 95: ...and the operating mode half or full duplex 5 37...
Page 96: ...SNMP Protocol 6 2 Using RMON 6 3 MIB Objects 6 3 6 1 CHAPTER 6 MANAGING VIA SNMP AND RMON...
Page 110: ...Introduction C 2 Windows Terminal C 3 APPENDIX C SAMPLE CONFIGURATION C 1...
Page 113: ...Troubleshooting Chart D 2 APPENDIX D TROUBLESHOOTING D 1...
