- 30 –
No.JXC
※
-OMY0002
Effective condition of the Parallel I/O signal
SETON
SVRE
BUSY
SETUP
(Return to origin)
-
ON
OFF
*1)
DRIVE
(Operation start instruction)
ON
ON
-
("-" = It doesn't depend in the ON/ OFF state of the each output signal)
*1) During the positioning operation the SETUP input will be disabled whilst hold is in operation.
注意
SETUP and DRIVE can only be accepted during the above conditions. An Alarm condition will happen
during all other times.
Make sure to allow intervals of 15 ms or longer (30 ms is recommended) between input signals, and
maintain the input state for the same period of time.