![background image](http://html.mh-extra.com/html/smc-networks/jxc-1-series/jxc-1-series_supplementary-operation-manual_1300024014.webp)
-13-
JXC
※
-OMX0018
ORIG offset
*1)
This defines the position of the actuator after the return to origin
operation.(Unit: mm)
■
The ORIG offset is 0 (mm).
■
The ORIG offset is 100 (mm).
Caution
If the value for the
“ORIG offset” is changed, the “Stroke (+)”
and
“Stroke (-)” of the basic parameters should be checked.
“ORIG offset” becomes valid after the return to origin operation,
make sure that return to origin operation is performed after any
changes.
XX
Max force
*1)
The maximum force for the pushing operation (Unit: %).
XX
Para protect
1 to 2
Sets the range in which the parameter and step data can be
changed.
1. Basic par Step data (Basic par Return to
origin par Step data)
2. Basic parameter (Basic par Return to origin
parameter)
XX
Enable SW
1 to 2
This defines the status of the Enable switch of the teaching box.
1: Enabled
2: Disable
XX
Unit name
Fixed value
Indication of actuator type compatible with the controller.
Do not change the setting.
-
W-AREA1
“
Stroke (-)
”
to
“
Stroke (+)
”
of the basic
parameter
This is the setting to define the conditions where the WAREA will
be turned ON. [Unit: mm]
If the current position is within the range between the W area end
1 and W area end 2, the WAREA will be turned ON.
* If W area output end 1 >W area output end 2, the alarm
“Parameter ALM” will be activated. However no alarm is
generated if W area end 1= W area end 2 = 0, the WAREA will
be turned OFF
XX
W-AREA2
“
Stroke (-)
”
to
“
Stroke (+)
”
of the basic
parameter
XX
ORG Correct
Fixed value
This is a fixed value for the controller. Do not change the setting.
(Default value is
“
0
”
)
-
Sensor type
Fixed value
This is a fixed value for the controller. Do not change the setting.
(Default value is
“
2
”
)
-
Option 1
Fixed value
This is a fixed value for the controller. Do not change the setting.
(Default value is
“
0
”
)
X
Undefined
parameter No.11
Fixed value
This is a fixed value for the controller. Do not change the setting.
(Default value is
“
0
”
)
X
Undefined
parameter No.12
Fixed value
This is a fixed value for the controller. Do not change the setting.
(Default value is
“
0
”
)
-
*1) The actuator model determines the available input values. Refer to the operation manual of the actuator
for details.
M
Actuator
In the examples on the left, the
actuator positions are not different
but the reference point that the
controller recognizes will be
changed after the return to origin
operation.
Controller recognizes
Position after return to origin
position (0mm)
M
Actuator
Controller recognizes
Position after return to origin
position (100mm)