![background image](http://html.mh-extra.com/html/smc-networks/jxc-1-series/jxc-1-series_supplementary-operation-manual_1300024012.webp)
-11-
JXC
※
-OMX0018
(4) Precautions for electric actuator installation
Warning
Do not use in an environment where strong magnetic field are present.
A magnetic sensor is used in the encoder. Therefore, if the actuator motor is used in a strong magnetic
field environment, malfunction or failure may occur.
Do not expose the actuator motor to a magnetic field with a magnetic flux density of 1 mT or more.
When installing an electric actuator or an air cylinder with an auto switch (ex. CDQ2 series) or electric
actuators side by side, maintain 40 mm minimum space around the motor.
Refer to the construction drawing of the actuator motor.
Air cylinder installation with an auto switch is forbidden in the shaded area.
4. Initial Setting Method
Refer to the Operation Manual for the JXC□1 series for the initial setting method of the rotary switch
or field network.
5. External Connection
Refer to the Operation Manual for the JXC
□
1 series.
6. Power Supply Plug
Refer to the Operation Manual for the JXC
□
1 series.
7. LED Display
Refer to the Operation Manual for the JXC
□
1 series.
8. Operation Methods
Refer to the Operation Manual for the JXC
□
1 series.
9. Memory Map
Refer to the Operation Manual for the JXC
□
1 series.
40
40
40
40
40
40
40
40