![background image](http://html.mh-extra.com/html/smc-networks/jxc-1-series/jxc-1-series_supplementary-operation-manual_1300024013.webp)
-12-
JXC
※
-OMX0018
10. Setting Data Entry
Refer to the Operation Manual for the JXC
□
1 series.
10.1 Step data
Refer to the Operation Manual for the JXC
□
1 series.
10.2 Basic parameters
The
“
Basic parameter
”
is data to define the operating conditions of the controller, conditions of the actuator,
etc
Activation: “XX” = Become effective just after recorded into the controller
“X” = Become effective after restarting the controller
“
-
”= The parameter cannot be changed (fixed value)
Basic parameters
.
Parameter name
Input
range
Details
Acti
vation
Controller ID
1 to 32
Identification number (axis) parameters of serial communications
(communication with PC, teaching box) are set.
X
I/O pattern
Fixed value
This is a fixed value for the controller. Do not change the setting.
(Default value is
“1”)
-
ACC/ DEC pattern
Fixed value
This is a fixed value for the controller. Do not change the setting.
(The default value varies depending on the electric actuator)
-
S-motion rate
Fixed value
This is a fixed value for the controller. Do not change the setting.
(The default value varies depending on the electric actuator)
-
Stroke (+)
*1)
This defines the positive (+) side limit of the position. (Unit: mm)
Any value greater than the [stroke (+)] value cannot be entered in
the
“Position” field data of step parameter setup.
XX
Stroke (-)
*1)
This defines the positive (-) side limit of the position. (Unit: mm)
Any value greater than the [stroke (+)] value cannot be entered in
the
“Position” field data of step parameter setup.
XX
Max speed
*1)
This defines the maximum limit of the speed. (Unit: mm/s)
Any value greater than the [stroke (+)] value cannot be entered in
the
“Position” field data of step parameter setup.
XX
Max ACC/DEC
*1)
This defines the maximum settable acceleration. (Unit: mm/s
2
)
Any value greater than the [Max ACC/DEC] value cannot be
entered in the
“Accel” field data of step parameter setup.
XX
Def In position
*1)
This defines the range to activate the INP when the actuator is
within it after the return to origin operation.(Unit: mm)
XX