SMC Networks HYRODLESS MONOSASHI-KUN, Operating Manual

Page: 35 / 42

35
10-2 Adjusting Method
<Travel and fix of unit body>
Unit body can be traveled by loosening 4 pieces of bolt. Unit body can be fixed by tightening unit
body evenly with 4 pieces of bolt at the specific position. The position, however, may got out of the
position depending on the energy size for collision. Mounting brackets for adjusting holder are
provided for
–X416 and –X417. For the length of your request other than that, please consult with
us separately. (See bolt torque for fixing stroke adjusting unit.)
<Stroke adjustment of adjusting bolt>
Loosen lock nut for adjusting bolt and fix with lock nut after adjusting stroke with wrench from lock plate
side.
<Stroke adjustment of shock absorber>
After adjusting stroke by loosening two pieces of lock plate fixing bolt to turn shock absorber, fix shock
absorber by tightening lock plate fixing bolt evenly. On this occasion, care shall be taken so that bolts are
not tightened too much. (Please refer to torque for stroke adjustment unit lock plate bolt.)
Note) Although there are some cases where a little bend will be caused on lock plate due to tightening of
lock plate bolt, it does not affect on shock absorber and locking function.