SMC Networks HYRODLESS MONOSASHI-KUN, Operating Manual

Page: 16 / 42

16
NO
NO
No particular problems for
operation.
YES
1. Is there any influence by
magneteic field?
YES
2. Is cylinder exposed to
coolant, oil, water and
power, etc?
YES
Start
NO
Is the total of moment of
each direction to cylinder
and load factor of movable
load within "1"?
(in the case of without
guide)
Is kinetic energy within
allowable kinetic energy?
(in the case of with guide)
Select cylinder size so that
load factor will become
less than "1"?
Select cylinder size so that
kinetic energy will become
within allowable kinetic
energy.
Is it possible to use at less
than 14.5mT?
NO
Do not use it since it will
cause miscount and
insufficient control.
YES
NO
Do not use it since it will
cause brekage of sensor
or degradation of
YES
Can the cable of
Hyrodless Monosashi-kun
be wired separate from
the other power cable?
Do not use it since it is
easily affected by noise
due to pulse output, which
will cause maloperation.
NO
YES
Can the cylinder be
protected with a cover,
etc?
Chapter 5: Selecting Procedure
5-1 Precaution
Be sure to check with the procedure below before using Hyrodless Monosashi-kun. For positioning
with CEU2, check with the procedure of
“Operation Manual of Brake Positioning System (Rodless
type)
”.