SMC Networks ClimateWorx FieldServer ProtoNode FPC-N34, Startup Manual

Page: 4 / 46

ClimateWorx ProtoNode Start-up Guide
Page 4 of 46
TABLE OF CONTENTS
1 Certifications ........................................................................................................................................ 6
1.1 BTL Mark
– BACnet
®
Testing Laboratory ....................................................................................... 6
1.2 LonMark Certification ...................................................................................................................... 6
2 Introduction .......................................................................................................................................... 7
2.1 ProtoNode Gateway ....................................................................................................................... 7
3 Setup for ProtoNode ............................................................................................................................ 8
3.1 Record Identification Data .............................................................................................................. 8
3.2 Point Count Capacity and Registers per Device ............................................................................ 8
3.3 Configuring Device Communications ............................................................................................. 9
3.3.1 Input COM Settings on all Devices Connected to the ProtoNode ............................................ 9
3.3.2 Set Modbus Node-ID for each Device attached to the ProtoNode ........................................... 9
3.4 Selecting the Desired Field Protocol ............................................................................................ 10
3.5 BMS Network Settings: MAC Address, Device Instance and Baud Rate .................................... 11
3.5.1 BACnet MS/TP (FPC-N34): Setting the MAC Address for BMS Network .............................. 11
3.5.2 BACnet MS/TP (FPC-N34): Setting the Baud Rate for BMS Network .................................... 12
3.5.2.1 Baud Rate DIP Switch Selection ..................................................................................... 12
4 Interfacing ProtoNode to Devices .................................................................................................... 13
4.1 ProtoNode FPC-N34 and FPC-N35 Showing Connection Ports .................................................. 13
4.2 Device Connections to ProtoNode ............................................................................................... 14
4.2.1 Biasing the Modbus RS-485 Device Network ......................................................................... 15
4.2.2 End of Line Termination Switch for the Modbus RS-485 Device Network.............................. 16
4.3 BACnet MS/TP or Metasys N2 (FPC-N34): Wiring Field Port to RS-485 Network ...................... 17
4.4 LonWorks (FPC-N35): Wiring LonWorks Devices to the LonWorks Terminal ............................. 17
4.5 Power-Up ProtoNode.................................................................................................................... 18
5 Use ProtoNode Web Configurator to Setup the Gateway ............................................................. 19
5.1 Connect the PC to ProtoNode via the Ethernet Port .................................................................... 19
5.2 Connecting to ProtoNode Web Configurator ................................................................................ 20
5.3 Selecting Profiles for Devices Connected to ProtoNode .............................................................. 20
5.4 BACnet/IP and Modbus TCP/IP: Setting IP Address for Field Network ....................................... 22
6 BACnet MS/TP and BACnet/IP: Setting Node_Offset to Assign Specific Device Instances ..... 24
7 How to Start the Installation Over: Clearing Profiles ..................................................................... 25
8 LonWorks (FPC-N35): Commissioning ProtoNode on a lonworks Network ............................... 26
8.1 Commissioning ProtoNode FPC-N35 on a LonWorks Network ................................................... 26
8.1.1 Instructions to Download XIF File from ProtoNode FPC-N35 Using Browser ........................ 26
9 BACnet Explorer ................................................................................................................................ 28
Appendix A. Troubleshooting .................................................................................................................. 29
Lost or Incorrect IP Address ............................................................................................ 29 Appendix A.1.
Viewing Diagnostic information ........................................................................................ 30 Appendix A.2.
Check Wiring and Settings............................................................................................... 31 Appendix A.3.
LED Diagnostics for Communications Between ProtoNode and Devices ....................... 32 Appendix A.4.
Take Diagnostic Capture with the FieldServer Toolbox .................................................. 33 Appendix A.5.
Update Firmware ............................................................................................................. 36 Appendix A.6.
BACnet: Setting Network_Number for more than one ProtoNode on Subnet ................. 36 Appendix A.7.
Securing ProtoNode with Passwords .............................................................................. 37 Appendix A.8.
Appendix B. Vendor Information - ClimateWorx ................................................................................... 38
M52 Controller Modbus RTU Mappings to BACnet, Metasys N2, Modbus TCP/IP and Appendix B.1.
LonWorks ................................................................................................................................................ 38
Appendix C. “A” Bank DIP Switch Settings ........................................................................................... 42
“A” Bank DIP Switch Settings .......................................................................................... 42
Appendix C.1.