SMC Networks BARRICADETM SMCWGBR14-N2, User Manual

Page: 56 / 132

C
HAPTER
6
| Wireless Settings
Wireless Security
– 56 –
W
IRELESS
S
ECURITY
Choose menu “Wireless->Wireless Security”, you can configure the security
settings of your wireless network.
There are five wireless security modes supported by the Router: WEP
(Wired Equivalent Privacy), WPA (Wi-Fi Protected Access), WPA2 (Wi-Fi
Protected Access 2), WPA2-PSK (Pre-Shared Key), WPA-PSK (Pre-Shared
Key).
Figure 35: Wireless Security
◆
Disable Security - If you do not want to use wireless security, select
this check box, but it’s strongly recommended to choose one of the
following modes to enable security.
◆
WEP - It is based on the IEEE 802.11 standard. If you select this check
box, you will find a notice in red as show in the following figure.