![background image](http://html1.mh-extra.com/html/smc-networks/barricade-smc7301ta/barricade-smc7301ta_user-manual_1300275040.webp)
40
connected to the remote LAN.
My System Name:
the name that the remote system will use to recognize
your network. This field is case sensitive.
My System Password:
the password the remote system will use to
authenticate your system. This field is case sensitive.
Note:
Make sure the remote site is configured with the same values you
specify in
My System Name
and
My System Password
.
Remote System Name:
the name of the remote network that will dial in. This
field is case sensitive.
Remote System Password:
the password that your SMC7301TA will expect
to see from the remote system. Note that authentication is CHAP, PAP, or
MS-CHAP, meaning that CHAP will be used to authenticate the incoming call
first. If CHAP fails, then PAP will be used. If PAP fails again, then MS -CHAP
will be used.
Step 6:
If you selected
Outgoing
or
Both
as your
Call Direction
, click
APPLY and TEST
, or select
ADVANCED
for more options. You must still click
Apply and Test
even if the other end of the connection has not been
configured. In this case the test will fail, but that can be considered normal.
Note:
When you click
APPLY and TEST
, the SMC7301TA attempts to place a
call to your remote site and log in. Watch the Message Window for any
progress messages. After the test is successful, the SMC730 1TA will
disconnect from your remote site. If it is not successful, you can make any
necessary changes based on progress messages that appear in the message
window, and try again.
Advanced Options for Remote
Office Access Profiles
If you press the
Advanced
button from the above
Connection Profile
Configuration ,
the following screen appears.