![background image](http://html1.mh-extra.com/html/smc-networks/barricade-smc7301ta/barricade-smc7301ta_user-manual_1300275007.webp)
7
password).
SMC7301TA also supports call back for dial -in users so that remote
users are really who they say they are.
ISDN Caller ID may be used for incoming call authentication.
SMC7301TA uses a private IP addressing scheme to prevent devices
on your LAN from being accessed by users on the Internet.
Console and Telnet Configu ration provide password protection.
IP packet filtering may be used to enhance security requirements.
A Physical Look at the SMC7301TA
Rear Panel:
The following illustration shows the rear panel of the SMC7301TA:
ISDN S/T
TERMINAL
SWITCH
WAN
LAN
CONSOLE
AC 7.5V
One RJ-45 ISDN port for connectio n to your ISDN line.
One RJ-45 10/100 Mbps LAN port for connection to a workstation, or to
another switch or hub.
One RJ-45 10 Mbps WAN port for connection to an xDSL/cable
modem.
One RS-232 DB-9 port to enable console management capability.
One 7.5V AC power connector for connection to an AC power adapter
(included as part of the product).
One DIP switch on the rear panel allows you to set the terminating
resistor conveniently if the single ISDN line supports more than one
ISDN terminal equipment at the sa me time.
The LEDs on the front