Smartwatch H20NV8, Installation Manual, Page: 99 / 172

SmartWatch® Network Video Recorder User Manual
99
8.2 Setting Sensor Alarms
Steps:
1. Enter Alarm Settings in System Configuration and select an alarm input.
Menu> Configuration> Alarm
Select Alarm Input tab to enter Alarm Input Settings screen.
Figure 8. 4 System Configuration Alarm Status Screen
2. Set up the handling action of the selected alarm input.
Check the Enable checkbox and click button to set up its alarm response actions.
Figure 8. 5 Alarm Input Setup Screen
3. Select Trigger Channel tab and select one or more channels which will start to record or become full-screen
when an external alarm is input.
4. Select Arming Schedule tab to set the channel’s arming schedule.
Choose one day of a week and Max. eight time periods can be set within each day.
Time periods shall not be repeated or overlapped.
5. Select Linkage Action tab to set up an alarm response actions of the alarm input (please refer to Chapter
Setting Alarm Response Actions ).
Repeat the above steps to set up arming schedule of other days of the week. You can also use Copy button
to copy an arming schedule to other days.