Smartwatch H20NV8, Installation Manual, Page: 31 / 172

SmartWatch® Network Video Recorder User Manual
31
Figure 2. 22 Protocol Management Screen
2. There are 16 customized protocols provided in the NVR, you can edit the protocol name; and select to enable
the sub-stream.
Before customizing the protocol for the network camera, you have to contact the manufacturer of the
network camera to consult the URL (uniform resource locator) for getting main stream and sub-stream.
Example: The format of the URL is: [Type]://[IP Address of the network camera]:[Port]/[Path]. E.g.,
rtsp://192.168.1.55:554/ch1/main/av_stream.
Protocol Name: Edit the name for the custom protocol.
Enable Substream: If the network camera does not support sub-stream or the sub-stream is not needed,
leave the checkbox empty.
Type: The network camera adopting custom protocol must support getting stream through standard RTSP.
Transfer Protocol: Select the transfer protocol for the custom protocol.
Port: Set the port number for the custom protocol.
Path: Set the resource path for the custom protocol. E.g., ch1/main/av_stream.
3. Click Apply to save the settings and click OK exit.
4. Choose the protocol type of transmission and choose the transfer protocols.
The protocol type and the transfer protocols must be supported by the network camera.
After adding the customized protocols, you can see the protocol name is listed in the dropdown list, please refer
to Figure 2. 23.