Smartwatch H20NV8, Installation Manual, Page: 106 / 172

SmartWatch® Network Video Recorder User Manual
106
8.6 Setting Alarm Response Actions
Alarm response actions will activate when an alarm or exception occurs, these include Full Screen Monitoring,
Audible Warning (buzzer), Notify Surveillance Center, Trigger Alarm Output and Send Email.
Full Screen Monitoring
When an alarm is triggered, the local monitor (VGA or HDMI monitor) display the alarm camera in full screen.
If alarms are triggered simultaneously, their full-screen images will be switched at an interval of 10 seconds
(default dwell time). Dwell time can be set in Menu >Configuration>Live View, and set the value of Full Screen
Monitoring Dwell Time.
Auto-switch will stop once the alarm stops.
Audible Warning
Trigger an audible beep when an alarm is detected.
Notify Surveillance Center
Sends an alarm signal to remote alarm host when an event occurs. The alarm host refers to the PC installed with
Remote Client.
Email Linkage
Sends an email with alarm information to a user or users when an alarm is detected.
Please refer to Chapter9.2.10 Configuring Email for details of Email configuration.
Trigger Alarm Output
Trigger an alarm output when an alarm is triggered.
1. Enter Alarm Output screen.
Menu> Configuration> Alarm> Alarm Output
Select an alarm output, alarm name and dwell time. Click Schedule button to set the arming schedule of the
alarm output.
Figure 8. 13 Alarm Output Setup Screen
2. Set up an arming schedule of the alarm output.
Select one day of a week and up to 8 time periods can be set within each day.
Time periods shall not be repeated or overlapped.