Smartwatch H20NV8, Installation Manual, Page: 21 / 172

SmartWatch® Network Video Recorder User Manual
21
2.1 Starting Up and Shutting Down the NVR
Proper startup and shutdown procedures are critical for the life of the NVR.
Starting up the NVR:
Steps:
1. Check the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an
Uninterruptible Power Supply (UPS) is used with the NVR.
2. Turn on the power switch on the rear panel.
3. After startup, the Power LED indicator turns on. A splash screen with the status of the HDD appears on the
monitor. The row of icons at the bottom of the screen shows the HDD status. ‘X’ means that the HDD is not
installed or cannot be detected.
Shutting down the NVR
Steps:
1. Enter the Shutdown menu.
Menu > Shutdown
Figure 2. 1 Shutdown Menu
2. Click the Shutdown button.
3. Click the Yes button.
4. Turn off the power switch on the rear panel when the attention pops up.
Figure 2. 2 Shutdown Attention Window
Rebooting the NVR
In the Shutdown menu, you can also reboot the NVR.
Steps:
1. Enter the Shutdown menu by clicking Menu > Shutdown.
2. Click the Logout button to lock the NVR or the Reboot button to reboot the NVR.