Smartwatch H20NV8 Installation Manual Download Page 39

Page: 39 / 172

SmartWatch® Network Video Recorder User Manual

3.3

Adjusting Live View Settings

Live View settings can be configured to suit the end user. You can configure the output interface, dwell time for

cameras, on/off audio, the screen number for each channel, etc.

Steps:

Enter the Live View Settings screen.

Menu> Configuration> Live View

Figure 3. 14

Live View-General

The settings available in this menu include:

•

Video Output Screen:

Output to be configured. Only VGA/HDMI is selectable by default.

•

Live View Mode:

Display mode to be used for Live View.

•

Dwell Time:

The time in seconds to

dwell

between switching of channels when enabling auto-switch in Live

View.

•

Enable Audio Output:

Enables/disables audio output.

•

Event Output:

Select the output to show event video.

•

Full Screen Monitoring Dwell Time:

The time in seconds to display alarm event screen.

Setting Cameras Order

Figure 3. 15

Live View- Camera Order

Select a

View

mode:

Double-click on the channel number to display the channel in the window.

Summary of Contents for H20NV8













































































































































































Search results

Summary of Contents for H20NV8

Reviews:

Smartwatch H20NV8, Installation Manual, Page: 39 / 172

Search results

Summary of Contents for H20NV8

Reviews: