Smartwatch H20NV8, Installation Manual, Page: 124 / 172

SmartWatch® Network Video Recorder User Manual
124
9.4 Configuring Network Detection
You can obtain network connecting status of NVR through the network detection function, including network
delay, packet loss, etc.
9.4.1 Testing Network Delay and Packet Loss
Steps:
1. Enter the Network Traffic screen.
Menu >Maintenance>Net Detect
2. Click the Network Detection tab to enter the Network Detection menu, as shown in Figure 9. 28.
Figure 9. 28 Network Detection Screen
3. Enter the destination address in the text field of Destination Address .
4. Click Test to start testing network delay and packet loss. The testing result pops up on the window. If the
testing is failed, the error message box will pop up as well.
9.4.2 Exporting Network Packet
By connecting the NVR to network, the captured network data packet can be exported to USB-flash disk and other
local backup devices.
Steps:
1. Enter the Network Traffic screen.
Menu >Maintenance>Net Detect
2. Click the Network Detection tab to enter the Network Detection screen.
3. Select the backup device from the dropdown list of Device Name, as shown in Figure 9. 29.
Figure 9. 29 Export Network Packet