HGM8110DC-2 GENSET CONTROLLER USER MANUAL
HGM8110DC-2 Genset Controller 2020-02-20 Version 1.0 Page 67 of 69
14.19
YUCHAI
It is suitable for BOSCH common rail pump engine.
Table 45 - Engine 42-Pin Connector
Terminals of controller
Engine 42 pins port
Remark
Fuel relay output
1.40
Connect to engine ignition lock.
Start relay output
-
Connect to starter coil directly.
CAN GND
-
CAN communication shielding line (connect
with controller‘s this terminal only).
CAN(H)
1.35
Using impedance 120Ω connecting line.
CAN(L)
1.34
Using impedance 120Ω connecting line.
Table 46 - Engine 2-Pin Connector
Battery
Engine 2 pins
Remark
Battery negative
1
Wire diameter 2.5mm
2
Battery positive
2
Wire diameter 2.5mm
2
Engine type: BOSCH
14.20
WEICHAI
It is suitable for Weichai BOSCH common rail pump engine.
Table 47 - Engine Connector
Terminals of controller
Engine port
Remark
Fuel relay output
1.40
Connect to engine ignition lock.
Start relay output
1.61
CAN GND
-
CAN communication shielding line (connect
to the controller at this end only).
CAN(H)
1.35
Using impedance 120Ω connecting line.
CAN(L)
1.34
Using impedance 120Ω connecting line.
Engine type: GTSC1
NOTE:
If there is any problem of connection between controller and ECU communication, please feel free to contact
SmartGen‘s service.
