HGM8110DC-2 GENSET CONTROLLER USER MANUAL
HGM8110DC-2 Genset Controller 2020-02-20 Version 1.0 Page 13 of 69
Icon
Key
Description
Confirm
In settings menu, confirm the set value.
Exit
1. Return to the first screen;
2. In settings menu return to previous level menu.
NOTE
: In manual mode, press
and
simultaneously and genset can be forced to start. At this time,
controller won't judge whether genset has been started according to crank disconnect conditions, but starter separation is
controlled by operator. When operator observes genset has been started, release the buttons, start output will be stopped
and controller will enter Safety On Delay.
CAUTION!
Default password is "00318", operator can change the password to prevent others changing advanced
configurations randomly. Please remember the password clearly after change. In case that you forget it, please contact
company personnel and feedback PD information in ABOUT page to service personnel.
5.2
CONTROLLER PANEL
Fig. 1 - Controller Front Panel
NOTE
: Partial indicators illustration:
Table 6 - Alarm Indicators
Alarm Type
Alarm Indicator
No Alarm
Indicator off
Warning
Slow flashing(1time/s)
Trip Alarm
Slow flashing(1time/s)
Shutdown Alarm
Fast flashing(5 times/s)
Trip and Stop Alarm
Fast flashing(5 times/s)
NOTE 1: Status indicator:
illuminated from crank disconnect to ETS while off during other periods.
NOTE 2: Gens normal Indicator
：
It is light on when generator is normal; flashing when generator state is abnormal; off
when there is no generator power.
