Highlighting
Close
and pressing the button will extract the video associated with the Motion event
and display the first image of the event. Pressing the
(Play/Pause) will start playing the “event” video
segment. Pressing the
(Search/Stop) button returns to live monitoring.
You can also narrow your event search by selecting the
Option…
button and setting up the new search
condition.
Figure 127 — Motion Search Option screen.
You can search video from the first to last recorded images, or you can set the start and stop times and dates.
Highlight the box beside
From
and press the button to toggle between On and Off. When set to Off,
you can enter a specific Date and Time. When set to On, the search will be from the first recorded image.
Highlight the box beside
To
and press the button to toggle between On and Off. When set to Off, you
can enter a specific Date and Time. When set to On, the search will be from the last recorded image.
Highlight the box beside
Type
and press the button. You can select between
Motion Search
and
Museum Search
.
Motion Search
detects motion in the defined area.
Museum Search
detects if a
defined object has moved.
Highlight the box beside
Zone
and press the button. An image from the video appears with a grid
overlaid. You can turn sensor blocks On and Off to define the area of the picture in which you want to
search for motion.
NOTE: Defining the area of the image in which you want to search for motion is nearly identical to
setting up the DVR for Motion Detection. Please refer to
Motion Detection Screen
in
Chapter 3 —
Configuration
for more detailed instructions on setting up the detection blocks.
NOTE: When setting the Museum Search Zone, the zone should be placed inside of the border
line of the target object. If the selected block is placed on the boarder line, the sensitivity of the
Museum Search may decrease.
The zone should be placed or focused on the centre or, at least, within the outline of targeted object.
Highlight the box beside
Sensitivity
and press the button. You will be able to select from
1
(low
sensitivity) to
5
(high sensitivity).
Highlight the box beside
Min. Blocks
and press the button. You will be able to set the number of sensor
blocks that must be activated. Setting the Min Blocks will only be available if Motion Search is selected.