Highlight the
Actions 1
and
Actions 2
tabs and the Object Detection Actions 1 and Actions 2 screens
display.
Figure 90 — Object Detection Actions 1 screen.
The DVR can be set to react to object detection differently for each camera. Each camera can be associated
with another camera, trigger an Alarm-Out connector, sound the DVR’s internal buzzer, notify a number
of different devices, move PTZ cameras to preset positions, and/or display a camera on a SPOT monitor.
NOTE: You can associate multiple cameras with a camera that detects motion.
Highlight the box under the
Record
heading and press the button. A list of cameras appears. You can
associate as many cameras with that camera as you wish. If the DVR detects an object on the selected
camera, it starts recording video from all the associated cameras.
NOTE: For the Record action, the camera you select should be set to the Event or Time & Event
recording mode in the Record Schedule setup screen.
Highlight the box under the
Alarm-Out
heading and press the button. A list of Alarm Outputs appears.
You can associate as many Alarm-Outs with that camera as you wish. When the DVR detects an object
on the selected camera’s input, it triggers output signals on all the associated Alarm-Out connectors. You
can also have the DVR’s internal buzzer sound if an object is detected on the selected camera.
NOTE: For the Alarm-Out action, the alarm output and beep you select should be set to the Event
mode in the Alarm-Out setup screen (Schedule tab).
Highlight the box under the
Notify
heading and press the button. You can toggle the entire list On and
Off by highlighting
Notification
and pressing the button. You can toggle the individual items On and
Off by highlighting that item and pressing the button. Highlight
OK
and press the button to accept
your changes.
NOTE: For the Notify action, the notify item you select should be enabled in the Notification setup
screen and the DVR should be registered in the RAS (Remote Administration System).
