SMART Wallbox A0009069206, Instruction Manual, Page: 7 / 24

smart Wallbox Important information 3
> The wallbox must not be covered with stickers or other objects or materials so that sufficient air
circulation is ensured at all times.
> No liquids, or objects or receptacles containing liquids, must be placed on the housing.
> Please note that, in some countries, a different tripping characteristic (e.g. Type B) for the upstream
residual current circuit breaker (residual current device, in the following called RCCB, see also 'Glos-
sary & Definitions' on page 28) may be required. In this case, please contact your local smart techni-
cal support.
> Please note that operating a radio transmitter in the immediate vicinity (< 20 cm) of the wallbox may
lead to malfunctions and should therefore be avoided.
> This device is not intended to be used by persons with limited physical, sensory or mental abilities
(including children) and/or lacking knowledge, unless they are supervised by someone responsible
for their safety or have received instructions from such a person on how to use the device.
> Children must be supervised so that they do not play with the device.
> Please note that the smart Wallbox may be installed and operated at elevations of max. 2,000 meters
AMSL (above mean sea level).
General product information.
This smart wallbox represents the current state of technology and fulfils all current technical safety
requirements, guidelines and standards. The safety information provided in this manual serves to en-
sure the proper and safe operation of the device. Disregard of or actions contrary to the safety infor-
mation and instructions contained in this manual may lead to electric shock, fire and/or severe injury.
Malfunctions affecting the safety of persons, connected electric devices or the device itself must be
repaired by a specialist electrical contractor.
Should a malfunction occur with the wallbox, please always contact the company that carried out the
installation first. If the malfunction can still not be resolved, please contact your local smart technical
support.
Always contact your local smart technical support if:
> the housing has been damaged mechanically,
> the housing cover has been removed or can no longer be closed or locked,
> sufficient protection against splashing water and/or foreign objects is obviously no longer evident,
> there is functional or visible damage to the charging socket or external charging cable
> or the wallbox does not function properly or has been otherwise damaged.
DANGER!
Should you detect damage to the housing, charging socket or charging cable, you must
take the wallbox out of operation immediately via the upstream fuse(s) in your domestic
power distribution box: No further use of the wallbox is permitted in this case! Please con-
tact your local smart technical support!