SMART Wallbox A0009069206, Instruction Manual, Page: 21 / 24

smart Wallbox Appendix 17
Standard Explanation
E DIN EN 61851-22:2011-04 Conductive charging systems for electric vehicles – Part 22: AC charg-
ing station for electric vehicles
HD 60364-7-722:2012 Low voltage installations – Part 7-722: Power supply for electric ve-
hicles
Classes of protection & Degrees of protection.
Class of protection /
Degree of protection
Explanation
Class of protection I: All electrically conducting parts of the device are connected
at low resistance with the protective earth system of the fixed installation.
IP 44
Degree of protection of the device: Protection against the intrusion of solid par-
ticles more than 1 mm in diameter and against splashing water (model variant:
A0009069306).
IP 54
Degree of protection of the device: Protection against touch, dust in harmful quan-
tities and protection from splashing water (model variant: A0009069206)
CE certification and compliance declaration.
The smart Wallbox carries the CE mark. The associated declaration of compliance is avail-
able for download in electronic format at
www.yourwallbox.de .
Maintenance.
After installation, your wallbox is mostly maintenance-free. However, because the wallbox processes
high electrical voltages internally, it is recommended to conduct a visual inspection of the housing and
check the externally accessible components and accessories at certain intervals (e.g. biannually).
DANGER!
Never remove the internal cover of the wallbox: Cleaning or maintenance of components is
not necessary, or may not under any circumstances be performed by the user.
> Conduct a visual inspection of the housing surfaces as well as the charging socket(s) and check for
damage.
> Conduct a visual inspection of the charging cable and ensure that the cable does not show any visual
damage or deformation.
Should you find any obvious damage during the above-mentioned checks, please contact your local
smart technical support.