smart Wallbox Charging procedure 7
‡ Charging procedure.
The mechanical and electrical installation of the smart Wallbox model variants described in this man-
ual must always be carried out by qualified specialist personnel: Preparation of the domestic power
supply, and electrical connection to your domestic power supply in particular, must be carried out by
a specialist electrical contractor, and subsequently inspected and approved as part of the process of
taking the device into operation. Please contact a specialist electrical contractor or your local smart
partner, who will be pleased to assist you with any questions regarding the installation and operation
of your wallbox.
Installation itself is described in the a separate installation manual. That manual contains important
information regarding mechanical and electrical installation as well as regarding the subsequent func-
tional inspection, approval and taking into operation of the wallbox. It is advisable that you are present
when the device is taken into operation for the first time by a qualified specialist electrical contractor
to ensure that you are able to easily carry out charging procedures with your wallbox.
The current operating status is indicated by the three color LEDs on the front of the housing. Each LED
may ...
... be illuminated
(continuous ON)
... flash
... be extinguished
(continuous OFF).
You can find further information about operating states on the following pages.
Charging procedure with the smart Wallbox.
The wallbox is engineered for the fastest possible charging procedure of your smart vehicle according
to IEC 61851-1, Mode 3. Actual charging time depends on the battery installed in the vehicle and its re-
maining level of charge at the beginning of the charging procedure.
The wallbox is available in model variants with fixed charging cable and with Type 2 charging socket.
The A0009069206 model variant, however, includes a charging cable with Type 2 charging connector.
Here, the charging connector is kept in a matching charging connector
compartment on the right side of the wallbox housing and is only removed
for the charging procedure.
The A0009069306 Model variant features a charging socket for which you
will need the separately available Mode 3 charging cable in order to con-
nect your smart vehicle. This model variant has an electromechanical
locking mechanism, which secures the charging connector to the wallbox
as soon as the charging cable is connected to both wallbox and vehicle.
You can obtain information about charging cables from your local smart
distributor.
WARNING!
The smart Wallbox must only be operated with the housing cover closed and locked: Before
charging, ensure that the housing cover is closed and locked using the triangular key in-
cluded.
Type 2 connector
03
Summary of Contents for Wallbox A0009069206
Page 1: ...smart Wallbox Instruction Manual ...
Page 4: ......