background image

Copyright 2000 by SMART Devices, Inc.

5945 Peachtree Corners East

Norcross, GA 30071-1337

Introduction

Page 2

Electrical Interference Warning

Page 3

Features

Page 4

Description

Page 5

Installation

Page 6

Operating Instructions

Page13

Front Panel Quick Reference

Page 15

Notes

Page 16

Table of Contents

SMART products are designed to deliver unsurpassed quality in workmanship and performance.
The following information gives detailed instructions on the installation and operation of the
SMART SHOWMATION automation.  We strongly encourage new owners of the SHOWMATION
to thoroughly read this entire manual before placing their new SMART product into service.  This
will ensure that the SHOWMATION will be operated properly to give the superior performance
that it was designed to deliver.

For service or installation assistance,

please call our Technical Support Department

between the hours of 8 AM and 5 PM E.S.T., Monday - Friday

at 1-800-45-SMART

LIMITED WARRANTY:  SMART products and accessories are warranted against malfunction or failure due to defects in workmanship or materials
for a period of one year from the date of shipment. If a problem occurs during the warranty period, the unit will be repaired, or replaced at our
option, without charge for materials or labor.  If air freight is requested by the dealer, the difference between air and surface charges will be billed to
the dealer. This limited warranty does not cover products that have been abused, altered, modified, or operated in other than specified conditions.
Prior factory approval is required on all returns.  Returned equipment or defective parts must be shipped freight prepaid to us by the dealer or
customer. Our limited warranty does not cover damages resulting from accident, misuse or abuse, lack of responsible care, or failures not attributable
to manufacturing defects, except as provided herein.  SMART Devices, Inc. makes no warranties, express or implied, including warranties of
merchantability or fitness for a particular purpose. RETURN POLICY:  Factory authorization MUST be obtained before returning any product.  A
15% restocking charge will be issued on unused equipment (in original box) that is returned for credit. Credit is issued to the dealers account.  The
credit may be used against future purchases and no cash transactions are offered.  All returns must be shipped freight prepaid by the dealer.
Equipment returned without a factory RA (Return Authorization) will be refused.

SHOWMATION Automation Control System Ver. 4.xx

Summary of Contents for Showmation

















Reviews: