10
SHOWMATION AUTOMATION
Controller Installation
Mount the Controller in the console as shown in this diagram. The power transformer should be at
the TOP or RIGHT. Please note that the the metal back plate is NOT symmetrical and cannot be
turned upside down. The PC board will only mount one way on the panel. There are four mounting
holes on the metal back plate which will pass #8 machine screws. These are accessible without
removing the PC board from the metal panel. The power cord may be plugged in or the plug may be
cut off for direct wiring to a 120VAC source.
DB25 cable from
Showgrammer II
DB25 cable from
Operator Panel
Power Connections
F12 & F13
MDL2 Fuse Slow Blow
