Extended Functions and Settings
80
smart CX10/VX10
7.9.4.3
Channel Change During Recording
Select
Independent Watch & Record
to set, whether the receiver
always shows the program that is been recorded or not:
On
Channel change is possible (default)
Off
Channel change is not possible.
7.9.4.4
Recording Subtitles
Select
Record with Subtitles
to set, whether you want to record subti-
tles (which are then also available during playback).
7.9.4.5
Recording Audio Tracks
Select
Record with Audio Tracks
to set, whether you want to record
all broadcasted audio tracks (which are then also available during
playback).
7.9.4.6
Recording Teletext
Select
Record with Teletext
to set, whether you want to record
broadcasted teletext data (which are then also available during play-
back).
7.9.4.7
Power at the USB Port
You can set, whether a connected USB hard drive (without own power
supply) should be in operation during standby.
Select
USB Power in Standby
, to switch on or off the 5V voltage at
the USB port during standby.
If you selected
Off
and a Timer which is programmed
for recording starts the receiver, there is one minute
lead time in order to save enough time to initialize
(“boot up”) the HDD.
7.9.4.8
Blocking the menu during recording
Select
Recording Protection
, to set, whether the menu can be called
during recording.
On
the menu cannot be called during recording.
