Connecting smart CX10/VX10
smart CX10/VX10
19
4.1
Connection Diagram
4.2
Connecting the Satellite System
Connect the cable of the satellite system to the
LNB IN
socket.
The satellite signal at the LNB IN connection is looped
through the receiver and can be tapped at the LNB OUT
connection, to connect, if desired, additional receivers.
If your receiver is in standby mode, you only can use
loop through if you selected the energy mode economic
(see section 7.9.1, page 74).
4.3
Connecting the TV Set
As shown in the connection diagram, there are various options to connect
the smartCX10/VX10 and the TV set. It depends on the connectivity of
your TV set which option is possible for you.
Home Network
Internet
