Connecting smart CX10/VX10
smart CX10/VX10
21
b.
Your home theater system can process digital
audio data – there is a digital audio socket.
SPDIF
oder
Connect your home theater system and your
receiver with an optical cable or a single-
pole cinch cable.
c.
Your home theater system cannot process digital
audio data – there is no digital audio socket.
Connect your home theater system and
your receiver with a double-pole cinch cable
(stereo).
If your home theater system (or stereo system) has
all these sockets, always choose the connection via
HDMI cable.
Quality is best, if both, audio transmission and video
transmission is digital.
4.5
Connecting a Data Storage Device (optional)
Connect the receiver via the USB socket or the eSATA socket to a data
storage device (USB stick or hard disk with USB or eSATA socket) with
a suitable cable. Then you can
•
store video recordings (see chapter 6, page 49) or
•
access various media files (see section 7.7, page 65).
An eSATA device has always to be connected be-
fore you switch on the receiver. Only then, the stor-
age device will be detected properly by the receiver.
Attention: The eSATA socket at the receiver rear
panel does not provide power. Therefore, only use
eSATA devices with own power supply!
