Basic Operation
24
smart CX10/VX10
5.2
Installation with RAPS
Your CX10/VX10 is equipped with RAPS. RAPS means
R
eceiver
A
utomat-
ic
P
rogramming
S
ystem and works like this:
Always when you switch off your receiver, RAPS is looking for changes in
the channel lists. This takes only a few seconds. If there are any, the new
data will be taken automatically as new channel list. If the channel param-
eters of a program will be changed, RAPS will take over these automati-
cally.
If there are new programs, these will be added. If programs are switched
off forever, the channel list positions will be deleted. New programs will
not simply be added but divided in logical blocks in order to allow fast
find.
For example for Germany there are a basic list and additionally the groups
3
rd
programs, info and sports, special interest, local TV, news (beginning
position 100) and many music channels (beginning position 123).
After you selected
RAPS
:
1. Press
OK
, in order to confirm the
chosen installation type.
2. Press the
green function key
(continue) in order to go to the
next installation window.
The third installation window
Antenna Settings
starts the RAPS instal-
lation. You only have to wait 10 seconds. The installation begins with a
„DiSEqC scan“, searching through the antenna signal for receivable
satellites.
Press the
green function key (continue)
.after the search for satellites
is completed.
Note that for the RAPS installation you must be
able to receive signal from Astra 19.2° East.
The next window displays the found satellites (marked with +):
3. Press the
green function key
(continue), in order to take over
these satellites
or
