Safety precautions
- Keep the printer out of magnetic and electric field exposure.
- Electric equipment repair shall be provided only by professionals in an authorized service center. Any
inappropriately implemented repair could lead to reducing the equipment lifetime.
It is strongly recommended to read and understand operating rules before using the 3D printer.
Attention:
- The printer must be set at a flat stable surface.
- Sky One installation site should be located at a dry light place.
- It is not allowed to use the printer in dusty or moist environments.
- The printing nozzle of the printer and the heated platform heat up to high temperature. To avoid burning
do not touch them while the printer is working. After the printer has finished printing wait at least 5-7
minutes in order to let them get cold.
- There are moving parts in the printer. Please avoid foreign objects of getting into the actuating
mechanisms of the printer while it is working. It may cause injuries and damage the equipment.
- As the equipment operates using the technology of fused deposition modeling, it is possible that
characteristic smell of plastic will occur during the printing process. It is a technological feature of the
equipment.
- Printer electronics are sensitive to voltage surges and variations. It is strongly recommended to assure the
stability of the power supply source. If there is no such source available, please get one.
- Usage of low quality and unapproved consumable materials may impact printed object quality and may
adversely affect or damage the feeding system of the 3D printer.
- In the event of a malfunction or operating failures turn the printer off and contact the service center.
- It is prohibited to place foreign objects on to the printer.
- Children admission to the printer during operating process without adult supervision is prohibited.
