The next block controls the printing head position relative to the work space. With the arrow keys the
printing head is positioned along every of three axises.
At the top side of the window the current position of every axis is shown. Red color means that the host
doesn’t have information about the printing head real position. Press the home button to move the extruder
to its defined position. After that the color turns black, it means the position is known.
Slider boxes for control of some parameters are located below. These parameters can be adjusted both
before and in the process of printing.
1.
The “Speed multiply” slider allows it to change the printing/move speed (the value is set as
percentage in relation to the send feed rate).
2.
Control the flow rate – the amount of the plastic filament feeding as percentage in relation to
program set value.
3.
Turn on and control the fan rotation speed.
4.
Turn on the bed heating and choose its temperature.
5.
Turn on the extruder heating and choose its temperature.
