In the “connection” tab set the next parameters:
Connection – Serial connection (connection type);
Port – COM (printer SkyOne connection port number). The relevant SkyOne connection port number is
detected automatically when choose “Auto” option. But this function is not always working correctly. So it is
better to choose the exact port number;
Baud rate – 250000;
Transfer protocol – Autodetect;
Reset on Emergency – Send emergency command and reconnect;
Receive Cash Size – 127;
Communication Timeout – 80.
Check box “Use Ping-Pong Communication (Send only after ok)” should be checked.
Also as a matter of convenience we recommend to give the name of the configuration in the “printer” field at
the top corner of the parameters screen.
