Hardware Preparation and Installation
RTM-ATCA-747x-10G Installation and Use (6806800S80F)
31
If you integrate the blade in your own system please contact your local sales representative
for further safety information.
2.2.2
Power Requirements
The RTM gets safety-extra-low-voltage (SELV) power from the front blade.
2.3
Installing the Hard Disk Module
The RTM provides a hot swappable SAS hard disk module. In this section you can find
information on how to install the hard disk module. The RTM is shipped with an HDD slot
cover.
Figure 2-3 Location of Temperature Sensors of RTM-ATCA-747x-10G-SP (Variant #2)
AIR INLET TEMP
PCIe SWITCH TEMP
ETHERNET_1G_TEMP
ETHERNET_10G_TEMP
ETHERNET_10G_TEMP
AIR OUTLET TEMP
ETHERNET_10G_TEMP
Table 2-3
Power Dissipation
Characteristic
Value
Measured Max Power dissipation of RTM-ATCA-747x-10G
30W
NOTICE
Damage of Circuits
Electrostatic discharge and incorrect RTM installation and removal can damage
circuits or shorten their life.
Before touching the RTM or electronic components, make sure that you are working
in an ESD-safe environment.
