Hardware Preparation and Installation
RTM-ATCA-747x-10G Installation and Use (6806800S80F)
35
2.5.1
Installing the RTM
Installation Procedure
The following procedure describes the installation of the RTM. It assumes that your system
is powered. If your system is unpowered, you can disregard the blue LED and thus skip the
respective step. In this case it is a purely mechanical installation.
1. Locate the slot where the RTM has to be installed into the shelf's rear, which must be
the same as that of the front blade.
2. Ensure that the top and the bottom handles of the RTM are in an outward position by
pushing the latch in the direction depicted by the arrow. The handles will be
automatically released.
NOTICE
Data Loss
If you remove the RTM from a powered system, data that is in the process of being
written to the hard disk located on the RTM may be lost.
Disconnect the RTM hard disk from OS services before removing the RTM from a
powered system.
Product
Operates with
ATCA-7470
ATCA-7475
RTM-ATCA-747x-10G-D
Yes
Yes
RTM-ATCA-747x-10G-SP
Yes
Yes
Handle (Top view)
Handle (Front view)
Latch
