Safety Notes
RTM-ATCA-747x-10G Installation and Use (6806800S80F)
17
Operation
Blade Damage–Blade Surface
High humidity and condensation on the blade surface causes short circuits.
Do not operate the blade outside the specified environmental limits. Make sure the blade
is completely dry and there is no moisture on any surface before applying power.
Blade Overheating and Blade Damage
Operating the blade without forced air cooling may lead to blade overheating and thus
blade damage.
When operating the blade, make sure that forced air cooling is available in the shelf.
When operating the blade in areas of electromagnetic radiation ensure that the blade is
bolted on the system and the system is shielded by enclosure.
Environment
Always dispose of used blades, system components and RTMs according to your country’s
legislation and manufacturer’s instructions.
SFP Modules
Personal Injury and Damage of the RTM and SFP Modules
Installing and using SFP modules which are not fully certified and which do not meet all
relevant safety standards may damage the RTM and the SFP modules and may lead to
personal injury.
Only use and install SFP modules which are fully certified and which meet all relevant
safety standards.
Personal Injury
Optical SFP modules may be classified as laser products. When installing and using any
of these SFP modules, the regulations which correspond to the respective laser class apply
to the whole RTM. Not complying to these regulations may lead to personal injury.
When installing and using optical SFP modules which are classified as laser products,
make sure to comply to the respective regulations.
Eye Damage
Optical SFP modules may emit laser radiation when no cable is connected. This laser
radiation is harmful to your eyes. Do not look into the optical lens at any time.
