Installation and Operation - SLX-RX200
2. Connecting SLX-RX200 to audio and Infra-Red control
2.1
Connect the speakers or audio input on the display to the audio output on the receiver, using a
3.5mm jack plug.
2.2
If using the receiver to transmit Infra-Red signals back down the cable to the transmitter unit
then connect an ‘eye’ to the lower jack position as shown in the diagram below.
2.3
If using the receiver to transmit Infra-Red signals up to the display from the transmitter unit then
connect an ‘IR LED’ to the adjacent jack socket.
2.4
If using RS232 signals beyond 100m of Cat 5 than a local PSU might be needed
Please note: connecting the IR ‘eye’ will prevent the return RS232 path from the display
Page 16
Smart-e (UK) Ltd, Ranmore Manor, Ranmore Common, Dorking, Surrey, RH5 6SX
+44 (0) 1483 283365 Fax: +44 (0) 1483 281511, www.smart-e.co.uk
