Installation and Operation - SLX-RX100 Version 4.0
5. Setting the cable length dials
The receiver unit is preset for approximately 50m which is sufficiently accurate for most applications. However
if the image does not look sharp enough then follow the instructions below:
5.1
Whilst looking at an image on the display, preferably a long horizontal bar, adjust the CABLE
COMPENSATION
dial.
5.2
Looking at the right-hand edge of the bar you will see the image change. A highlighting bright
edge means over compensation whilst a blurred dark edge means under compensation.
5.3
Adjust the dial until both effects are neutralized.
The Contrast control dial is factory per-set and usually needs no adjustment.
Smart-e (UK) Ltd, Ranmore Manor, Ranmore Common, Dorking, Surrey, RH5 6SX
+44 (0) 1483 283365 Fax: +44 (0) 1483 281511, www.smart-e.co.uk
Page 12
