1. Connecting the SLX-RX111 to the display device
1.1
Making sure that the Cat 5 cable is connected to the SLX-TX111 transmitter output, connect
the cable to the RJ45 socket on the receiver unit.
1.2
If the cable connection is correct the power LED on the front of the receiver should illuminate
(power is sent up the Cat 5 cable).
1.3
Connect the display to relevant connector on the receiver (see diagram below) using the
appropriate
cable
1.4
If RS232 control is required then connect to the display via the 3.5mm minijack on the
receiver using a CAB-J19-1M.
Installation and Operation - SLX-RX111
Page 20
Smart-e (UK) Ltd, Ranmore Manor, Ranmore Common, Dorking, Surrey, RH5 6SX
+44 (0) 1483 283365 Fax: +44 (0) 1483 281511, www.smart-e.co.uk
