Pair 1 Pins 1 & 2
Pair 2 Pins 3 & 6
Pair 3 Pins 4 & 5
Pair 4 Pins 7 & 8
Connectors:
RJ-45
Capacitance:
14 pf/ft (46.2 pf/m)
Conductor Gauge:
24 AWG
Impedance:
100 +/- 15 ohms
4
-
Pair
7. Connecting the IR blaster (optional)
7.1 Using the IR Blaster control cable plug one end into the IR control port on the rear of the SmartNEt X
router whilst connecting the other end to the 1U Blaster box.
7.2 Then plug the IR emitter LED into the relevant 3.5mm jack socket on the front of the Blaster box,
making sure that the port number corresponds to the video input number on the router. See diagram be
low showing IR output 6 corresponding to the video input 6.
Installation and Operation - SmartNet X+
Page 6
Smart-e (UK) Ltd, Ranmore Manor, Ranmore Common, Dorking, Surrey, RH5 6SX
+44 (0) 1483 283365 Fax: +44 (0) 1483 281511, www.smart-e.co.uk
