APPENDIX A
REMOTELY MANAGING THE SYSTEM THROUGH A NETWORK INTERFACE
54
smarttech.com/kb/170910
Submenu setting
Description
Lamp Reminder
Select On to show or Off to hide the lamp replacement reminder
when it appears. This reminder appears 100 hours before the
recommended lamp replacement.
Lamp Mode
Adjusts lamp brightness to Normal or ECO. ECO increases the lamp
life by decreasing the image’s brightness.
ImageCare
Turns ImageCare on or off.
Auto Power Off
Sets the length of the auto power off countdown timer between 0
and 240 minutes. The timer begins to count down when the
projector no longer receives a video signal. The timer finishes when
the projector enters Standby mode. Select 0 to turn off the timer.
Select 120 to enable proper functioning of ImageCare.
Zoom
Adjusts the zoom to the center of the image in or out from 0 to 30.
H-position (RGB input)
Moves the horizontal position of the source video left or right from
0 to 100 (relative to the projected image).
NOTE
This is useful in situations where the source video is cut off.
V-position (RGB input)
Moves the vertical position of the source video up or down from -5
to 5 (relative to the projected image).
NOTE
This is useful in situations where the source video is cut off.
Aspect Ratio
Adjusts the image output to Fill Screen, Match Input or 16:9.
l
Fill Screen produces an image that fills the entire screen by
stretching and scaling.
l
Match Input matches the projector’s aspect ratio to the input’s
aspect ratio. As a result, black bands might appear along the
top and bottom edges of the screen horizontally (letterbox
format) or along the left and right edges of the screen vertically
(pillarbox format).
l
16:9 changes the output to 16:9 by letterboxing the image,
which is recommended for use with HDTV and DVDs
enhanced for wide-screen television.
NOTE
See
on page 89 for descriptions of each mode.
Startup Screen
Sets the type of startup screen to SMART or User. The SMART
screen is the default SMART logo on a blue background. The User
screen uses the saved picture from the Capture User Startup
Screen function.
