SMART Board 7000R Pro Series Installation And Maintenance Manual Download

Page: 17 / 81

Chapter 2

smarttech.com/kb/171538

Chapter 2:

Installing the display

Moving the display to the installation site

Using transportation aides

Accommodating doorways, hallways, and elevators

Dealing with cracked, chipped, or shattered glass

Saving the original packaging

Installing the display on a wall

Choosing a location

Choosing a height

Assessing the wall

Selecting mounting hardware

Selecting a wall mount

Mounting the display

Installing the display on a stand

Using SMART mobile stands

Using a third-party stand

Connecting to a network

Connecting power and turning on the display for the first time

Pairing pens with the display

About energy saving modes

SMART recommends that only trained installers install the display.

This chapter is for installers. Installers should read this information along with the installation instructions

included with the display before they begin the installation.

WARNING

Improper installation of the display can result in injury and product damage.

Moving the display to the installation site

After your organization receives the display, you need to move it to the place where you plan to install it.

On occasion, you might also need to move the display to another location after initially installing it.

Summary of Contents for 7000R Pro Series


















































































Search results

Summary of Contents for 7000R Pro Series

Reviews:

Related manuals for 7000R Pro Series

Brands by name

Popular brands

SMART Board 7000R Pro Series, Installation And Maintenance Manual

Search results

Summary of Contents for 7000R Pro Series

Reviews:

Related manuals for 7000R Pro Series

Brands by name

Popular brands