Chapter 1
Welcome
13
CAUTION
l
The accessory slot’s maximum available power is 60 W. The slot is not a limited power source. To
reduce the risk of fire, make sure that accessories connecting to the slot satisfy the fire enclosure
requirements of IEC 60950-1 and/or IEC 62368-1.
l
Do not remove the OPS PC module or other devices from the accessory slot while they are turned on.
NOTE
Unlike with older SMART Board interactive displays, you don’t need to install an AM30, AM40, or AM50
appliance in the accessory slot to use the iQ experience on SMART Board 7000R and 7000R series
displays. The iQ experience is embedded on these displays (see
on page 11). For this
reason, SMART doesn’t recommend installing AM30, AM40, or AM50 appliances in these displays’
accessory slots.
Convenience panel
The convenience panel contains buttons for turning the display on and off,
controlling the volume, freezing and unfreezing the screen, and showing and
hiding a screen shade. It also includes connectors for USB peripherals and a
computer or other input source.
Proximity sensors
The proximity sensors are located in the top-left and top-right corners of the
display’s frame.
The proximity sensors can detect people up to 16' (5 m) away when the display
is in an energy saving mode.
When the proximity sensors detect people in the room, the display turns on,
depending on how it’s configured.
If the room is empty for 60 minutes, the display returns to an energy saving
mode.
