SMART Board 600i3, Configuration And User'S Manual

Page: 51 / 80

99-00915-20 B0 Appendix A: Replacing Your UF55/UF55w Projector Lamp 41
Appendix A: Replacing Your UF55/UF55w Projector Lamp
This appendix has detailed instructions on how to replace your projector lamp. Topics include the following:
• Replacing the Projector Lamp (page 41)
– Removing the Projector from the Boom (page 43)
– Replacing the Projector Lamp Module (page 45)
– Re-attaching the Projector (page 47)
– Resetting the Lamp Timer (page 50)
Replacing the Projector Lamp
If a lamp fails, or if a replacement message appears on the screen of the UF55/UF55w projector, a qualified
person can replace the projector lamp. Don’t access the service panel without a replacement lamp and
instructions in hand.
WARNING
NOTE: Ensure that you remove the plastic lens cover from the projector.
Do not attempt to service the projector other than performing routine lamp replacement. Service
should be performed only by an authorized service provider. Other than the lamp module, there
are no user-serviceable parts inside the unit.